Masuter 4040 CNC Router Machine, 3-Axis Engraving Milling Machine 15.75×14.96” Working Area for Carving Cutting Wood Acrylic MDF Nylon
- Masuter 4040 is a budget-friendly CNC router with large working area of 400 x 380 x 55mm (15.75” x 14.96” x 2.16”). It uses a 60W spindle and NEMA17 stepper motors. Max moving speed is 2000mm/min and spindle speed range is 0~10000.
- The control board is equipped with an upgraded 32-bit chip which works more efficient and stable. It also supports add-ons such as offline controller, 300W spindle and power modules. (Add-ons sold separately)
- Masuter 4040 is capable to engrave, cut and drill many kinds of material such as wood, MDF, acrylic and resin etc. Recommended settings: speed-1000mm/min; depth per pass-0.2mm; plunge rate-200mm/min.
- HOME function and Emergency-Stop button are integrated on the machine. The machine will go to home with simply press the button.
- Main parts are pre-assembled. It takes about 20-30mins to fully assembly. The machine is compatible with Grbl software. It supports Windows XP/7/10, Linux and Mac OS.
Upgraded 32-bit Chip
The control board is equipped with an upgraded 32-bit chip. The maximum speed can be 2000mm/min.
Large Active Working Area
Masuter 4040 is a cost-effective CNC router with large working area of 400 x 380 x 55mm (15.75” x 14.96” x 2.16”).
There is a HOME shortcut button on the front acrylic. It enables the user to home directly.
|Active Working Area||15.75” x 14.96” x 2.16”(400x380x55mm)|
|Stepper Motor||NEMA 17|
|Max. Moving Speed||2000mm/min|
|Input Power Supply||12V/5A|
|Control Method||Computer & Offline controller|
|Support Software||Compatible with Grbl-control software|
|Support OS||Windows XP/7/8/10, Linux, Mac OS|
|Masuter||4040-XE||3018-SE V2||Reizer Mega||Reizer|
|Engraving Area||15.75 x 14.96 x 2.16 inch (400 x 380 x 55mm)||15.75 x 15.75 x 2.16 inch (400 x 400 x 55mm)||11 x 6.18 x1.3 inch (278 x 157 x 33mm)||800x400mm (31.5″x15.75″)||400x400mm (15.75″x15.75″)|
|Spindle/Power Module||60W spindle||300W spindle||60W spindle||20W power module (Optical output 5.5W)||20W power module (Optical output 5.5W)|
|Stepper Motor||NEMA 17||NEMA 23||NEMA 17||NEMA 17||NEMA 17|
|Offline Controller||Not included||Integrated to the controller box||Not included||Not included||Not included|
|Support Add-ons||Accommodate 300W spindle and 5W/15W/20W module||Accommodate 5W/15W/20W module||Accommodate 300W spindle and 5W/15W/20W module||Support power module only||Support power module only|
|Limit Switches||X, Y, Z||X, Y, Z||X, Y, Z||X, Y||X, Y|
|Shortcut Button||Home shortcut button||X||X||Home; Weak Light button||Home; Weak Light button|
|Application||Engrave/cut wood, MDF, resin, acrylic etc.||Engrave/cut wood, MDF, resin, aluminum, nylon, carbon fiber etc.||Engrave/cut wood, MDF, resin, acrylic etc.||Engrave/cut wood, MDF, acrylic etc.||Engrave/cut wood, MDF, acrylic etc.|
- 1x Masuter CNC Router (main parts pre-assembled)
- 1x Control Board
- 1x 60W Spindle
- 2x MDF working table
- 10x Engraving Bits
- 4x Hold-down Clamps
- 1x Power Supply
- 1x USB cable
- 1x Z Probe
- Packs of screws and tools